chore: clean up repo structure

- Add node_modules/, test-results/, e2e-report/, .omp/ to .gitignore
- Remove throwaway debug scripts (debug-pw*.js, debug-login-dom.js)
- Remove empty mock-server/ directory
- Untrack harness artifact (.omp/plans/)
- Add missing project files to git (e2e tests, Dockerfiles, tooling configs)

docker/openwrt-luci-entrypoint.sh

@@ -0,0 +1,95 @@
+#!/bin/sh
+# openwrt-luci-entrypoint.sh
+#
+# Starts ubusd, rpcd, configures the br-zt bridge, seeds UCI state,
+# and runs uhttpd in the foreground (the only foreground process).
+set -eu
+
+WIBLAN_CIDR="${ZTG_WIBLAN_CIDR:-10.99.13.0/24}"
+
+# ── 1. Start ubusd first (required for rpcd + uci) ──────────────────────────
+rm -f /var/run/ubus/ubus.sock /tmp/run/ubus/ubus.sock
+rm -f /tmp/lock/procd_*.lock
+mkdir -p /var/run/ubus
+/sbin/ubusd &
+UBUSD_PID=$!
+
+# Wait for ubus socket (up to 10s)
+for _i in 1 2 3 4 5 6 7 8 9 10; do
+    if [ -S /var/run/ubus/ubus.sock ]; then break; fi
+    sleep 1
+done
+
+if ! ubus list >/dev/null 2>&1; then
+    echo "ERROR: ubusd did not start in time" >&2
+    kill $UBUSD_PID 2>/dev/null || true
+    exit 1
+fi
+
+# ── 2. Start rpcd ────────────────────────────────────────────────────────────
+/sbin/rpcd &
+
+for _i in 1 2 3 4 5; do
+    if ubus call system board >/dev/null 2>&1; then break; fi
+    sleep 1
+done
+
+# ── 3. Seed root password (for LuCI login) ───────────────────────────────────
+if [ -f /etc/shadow ]; then
+    sed -i 's|^root:.*|root::0:0:99999:7:::|' /etc/shadow
+fi
+
+# ── 4a. Seed zt-gateway config from host staging if present ─────────────────
+if [ -f /host-config/zt-gateway ] && [ ! -f /etc/config/zt-gateway ]; then
+    cp /host-config/zt-gateway /etc/config/zt-gateway
+fi
+
+# ── 4. Configure gateway switch mode to initial state ────────────────────────
+if command -v uci >/dev/null 2>&1; then
+    uci set zt-gateway.global.active_gateway='amsterdam' 2>/dev/null || true
+    uci set zt-gateway.global.switch_mode='force' 2>/dev/null || true
+    uci set zt-gateway.global.drain_timeout='600' 2>/dev/null || true
+    uci commit zt-gateway 2>/dev/null || true
+fi
+
+echo "[entrypoint] ubusd + rpcd + config done"
+
+# ── 5. Network setup (bridge + routing) ──────────────────────────────────────
+# The target bridge device (used by zt-gateway-switch and health checks).
+BRIDGE="${ZTG_BRIDGE:-br-zt}"
+# Detect the interface that currently holds the 10.99.12.x address.
+SOURCE_IFACE=$(ip -o -4 addr show 2>/dev/null \
+    | awk '$4 ~ /^10\.99\.12\./ {print $2; exit}')
+
+if [ -z "$SOURCE_IFACE" ]; then
+    echo "WARNING: no 10.99.12.x interface found (expected zt-exit-net); using Docker bridge"
+    echo 1 > /proc/sys/net/ipv4/ip_forward
+    echo 0 > /proc/sys/net/ipv4/conf/all/send_redirects 2>/dev/null || true
+else
+    ip link add name "$BRIDGE" type bridge 2>/dev/null || true
+    ip link set "$BRIDGE" up
+
+    ADDR=$(ip -o -4 addr show dev "$SOURCE_IFACE" \
+        | awk '$4 ~ /^10\.99\.12\./ {print $4; exit}')
+    if [ -n "$ADDR" ]; then
+        ip addr del "$ADDR" dev "$SOURCE_IFACE" 2>/dev/null || true
+        ip addr add "$ADDR" dev "$BRIDGE"
+        ip link set "$SOURCE_IFACE" master "$BRIDGE"
+    fi
+
+    echo 1 > /proc/sys/net/ipv4/ip_forward
+    echo 0 > /proc/sys/net/ipv4/conf/all/send_redirects 2>/dev/null || true
+    echo 0 > /proc/sys/net/ipv4/conf/"$BRIDGE"/send_redirects 2>/dev/null || true
+
+    ip rule del from "$WIBLAN_CIDR" table 100 2>/dev/null || true
+    ip rule add from "$WIBLAN_CIDR" table 100 priority 100
+    ip route replace default via 10.99.12.3 dev "$BRIDGE" 2>/dev/null || true
+    ip route replace "$WIBLAN_CIDR" dev "$BRIDGE" table 1 2>/dev/null || true
+
+    echo "[entrypoint] networking: SOURCE=$SOURCE_IFACE BRIDGE=$BRIDGE ADDR=$ADDR"
+fi
+
+echo "[entrypoint] starting uhttpd..."
+
+# ── 6. Run uhttpd in foreground (replaces shell) ─────────────────────────────
+exec uhttpd -f -p 80 -h /www -u /ubus -a -r "OpenWRT-Test-Router"